Have you signed up for Blue Label drops?

Have you signed up for Blue Label drops?

Delta Flashlight Case

$35.00
Six months and a dozen prototypes in the making. It's just a case, but it's also not just a case. You know I never do things half way right? I've had this idea for years, but a machined case would cost half as much as a light. Enter "end-use" 3D printing, it's not just for prototyping anymore. We now offer the Delta Case in two different 3D printed materials.

{"name":"Version","position":1,"values":["Markforged: Smooth","Formlabs: Hex"]}

Version

    Discounts cannot be applied to this item
    Delta Flashlight Case
    Delta Flashlight Case Delta Flashlight Case Delta Flashlight Case Delta Flashlight Case Delta Flashlight Case Delta Flashlight Case Delta Flashlight Case
    Product Overview

    Home base for your Delta flashlight: Presentation case, travel box, you decide...

    According to TSA regulations, anything with a lithium battery must be carried in the cabin and not checked. I wanted to be able to throw a Delta in my carry-on without worrying about damage to the light, or the light damaging other items. It also protects the tailcap button from accidental activation. Nothing worse than needing light and having a dead battery :)

    Both cases are printed in-house.

    Now available in two verisions:

    • Markforged - Smooth: Printed on our Markforged MKII printer from carbon fiber reinforced nylon. This box is lighter and softer.
    • Formlabs - Hex: Printed on our Formlabs Fuse1 printer fron solid nylon 12. This box is heavier and the Fuse1 Powder SLS technology allows adding additional cosmetic detail.
    Product Details

    the new, new in manufacturing: integrated workflow (nerd alert)

    My favorite thing about this case is that it represents the absolute state of the art in modern design and manufacturing technology workflow. I use Autodesk Fusion 360 for all of our CAD design these days. I opened the 3D flashlight model and "built the box around the light," using the flashlight CAD data to drive the dimensions of the box. No need to take any physical measurements of the light in order to determine the geometry of the box.

    The lid is a mirror image of the bottom, and I was able to automatically "mirror" the part so any design changes made to the bottom portion are automatically updated to the lid. Basically you can get two parts out of a single design, and not have to remember to update every change on both parts. Sounds small, but in reality is a huge win.

    Here comes the good part. Normally I'd machine these components, but that requires hours of CAM programming to pick all of the cutting tools, set the tool paths, figure out how to hold the part inside the CNC, find all the cutting tools, buy some if I don't right ones, set those tools into tool holders, measure all of them after installation...and we haven't even cut any metal yet.

    With 3D printing I can go straight from "art" in Fusion 360, to "part" on the 3D printer. Literally export the model as a 3D printer file, load that file into the printer program...and print the part. It did take about a dozen prints to get everything perfect (my fault, not the printer's) but the design/development process was significantly shorter (and a fraction of the cost) of doing it the "old" way. CNC is so 2020.

    Premium barrel hinges
    Solid brass and manufactured by SOSS, these allow the top to open 170 degrees. Lubricated with Nano-Oil during assembly, they are a feat of engineering in their own right.
    Magnetic Closure
    The lid is held closed with 4 1/8" neodymium magnets pressed into the 4 corners of the box and makes for a delightful snap :)
    symmetrical design
    The box has a thumb notch for easy opening and each half is symmetrical, there is no top or bottom.
    3D printed
    3D printed in-house on either our Markforged MKII (carbon reinforced filament) or our Formlabs Fuse 1 (nylon 12). The carbon filament version is slightly softer and much lighter. The nylon 12 version is extremely rigid and has much more mass for that "quality you can feel" vibe.
    • Box Material
      * Markforged - Smooth: carbon fiber reinforced nylon
      * Formlabs - Hex: solid nylon 12
    • Hinge Material
      Solid brass with steel hinge pins
    • Magnets
      1/8" x 1/4" Neodymium N42
    • Weight
      * Carbon Reinforced Nylon: xxxx
      * Nylon 12: xxx
    Customer Reviews
    You may also like

    SEARCH

    Products

      SUGGESTED SEARCHES